Hội chế đồ, nơi tụ tập của các DIY-er

Blog

How to make a turntable for 360 photography or 3D object scanning – Part 5 : Firmware & App

1/ Firmware : Please download the following programs and files: ESP8266Flasher.exe ESP_DOWNLOAD_TOOL_V2.4.exe ESP8266Turntable.ino.bin ESP8266Turntable.spiffs.bin 2/ Upload firmware : You always need to flash the NodeMCU with ESP8266Flasher.exe first for a fresh installation. To select the right COM port, look at your Device Manager in your computer after plugging in the NodeMCU […]

Xem thêm

How to make a turntable for 360 photography or 3D object scanning – Part 4 : Electronic component

1/ Schematic : I use A4988 to control the step motor with the following schematic The camera controlled by two Opto PC817 that connected to two I/O pins in the following schematic Download the PCB design (esp8266turntable.brd) from here 2/ Parts : Buy all from here 1 x NodeMCU 1 x mini DC-DC […]

Xem thêm

How to make a turntable for 360 photography or 3D object scanning – Part 3 : Assembly hardware component

1/ The frame Put the top box and 4 x bars cut 45 degree at both ending together     And on the other side of MDF panel : 2/ The turntable Parts : Main dish Lazy susan rotator Dish gear 2 dishes for spacer M8 bearing Bearing holder Bolt and […]

Xem thêm

How to make a turntable for 360 photography or 3D object scanning – Part 2 : Prepare hardware component

1/ Cutting frame parts : I start cutting aluminum bar to make the turntable frame : * aluminum extrusion 30×30 profile 4 x 48 cm bars in length that are cut at 45 degrees at both ends Another 2 x 48 cm 4 x 10 cm (or 15 […]

Xem thêm

How to make a turntable for 360 photography or 3D object scanning – Part 1 : Introduction

I own a photography service that mainly provides 360 panorama shooting, 360 product shooting, 360 video, etc. Buying photography equipment always costs me a lot in the past, so I started to make stuff for myself on my free time. Luckily, knowing how to code, and being […]

Xem thêm
Trang 3 / 3123

LATEST POSTS

INFORMATION

496 Duong Quang Ham, ward 6, Go Vap district, HCM city
Get in touch with us via diyoracle@gmail.com. We will reply as soon as possible.

DONATION

Please make donation if the provided information is useful for you. We will spend more time to do better thing for you.

COPYRIGHT

All content are under GPL-3.0 license.

Please add reference link to related post if you redistribute content from this site .