Hội chế đồ, nơi tụ tập của các DIY-er

How to make a turntable for 360 photography or 3D object scanning – Part 5 : Firmware & App

1/ Firmware :

Please download the following programs and files:

2/ Upload firmware :

You always need to flash the NodeMCU with ESP8266Flasher.exe first for a fresh installation. To select the right COM port, look at your Device Manager in your computer after plugging in the NodeMCU board.

The parameters that we are using are as in the following pictures:

Click the flash button in the Operation tab and wait for flashing to be done.

You are now ready to flash the firmware with ESP_DOWNLOAD_TOOL_V2.4.exe

In the Download Path Config section, browse for both :

  • ESP8266Turntable.ino.bin -> 0x00000000
  • ESP8266Turntable.spiffs.bin -> 0x00100000

Other configurations are as in the above picture, click the START button after you have selected the right COM port.

Put the NodeMCU back in your board and you can connect the power source.

3/ Turn it On and Have a Try

Open your WiFi selection on the phone and connect to the WiFi hotspot that ends with Rotator360. After that open any web browser and type into the address bar.

Now, try pushing the Backward, Forward, or GO buttons in Dashboard tab and see the dish begins to rotate.

You can make some change on the Settings tab to meet your need. Such as :

  • Frames (total shots) per circle : 36 | 45 | 60 | 72
  • Speed : 1 | 2 | 3 | 4 circle per minute
  • Delay : 0 | 1 | 2 second(s) between frames

4/ Camera Connections


My 360 photography shots is here

Leave a Reply



496 Duong Quang Ham, ward 6, Go Vap district, HCM city
Get in touch with us via diyoracle@gmail.com. We will reply as soon as possible.


Please make donation if the provided information is useful for you. We will spend more time to do better thing for you.


All content are under GPL-3.0 license.

Please add reference link to related post if you redistribute content from this site .